High-Order Mesh Generation Using Pointwise

High-Order Mesh Generation Using Pointwise

Traditionally, adding cells to a mesh, known as H-refinement, was the primary means by which solution accuracy could be improved. The additional resolution enables the capturing of flow phenomena often diffused by coarser variations of the same mesh. Another technique used to improve spatial and temporal accuracy is by performing degree elevation, both for the assumed solution within a given element and for the element itself. In doing so, linear meshes can become curved with the addition of nodes along edges, faces, and in the interior. Fewer elements are then required to accurately represent curved geometry and capture complex flow features of interest.  

There are two primary challenges associated with the degree elevation of linear elements: boundary conformance and curving of high aspect ratio cells encountered within the boundary layer region. In this webinar, we will address these challenges by demonstrating the generation of a linear mesh for the Rotor 37 geometry, followed by the elevation of the linear mesh. Because geometry-mesh associativity is known, inserted nodes are properly constrained to the underlying geometry. Additionally, our optimization-based smoothing scheme propagates boundary perturbations into the interior of the mesh, ultimately improving the quality of the resulting high-order mesh and ensuring its validity. 

Discover how to:

  • Generate high-order meshes using Pointwise V18.2 R1
  • Improve meshing efficiency with the latest user interface enhancements
  • Quickly apply 2-D T-Rex (anisotropic tetrahedral extrusion) to resolve surface curvature
  • Improve mesh quality by synchronizing cell spacings
 
 
Travis Carrigan, Pointwise, Inc.

Travis Carrigan

Pointwise, Inc.

Travis Carrigan leads our Technical Sales Team. He received his M.S. in aerospace engineering from the University of Texas at Arlington in May 2011, where his thesis subject was “Aerodynamic Shape Optimization of a Vertical Axis Wind Turbine.” Mr. Carrigan received his B.S. in aerospace engineering in 2009 from UTA and began working at Pointwise as an intern on our Technical Support Team in 2008.